Terms and conditions

Monarch Fire Technology ABN 15618502015, its employees, management, directors, consultants, vendors, distributors, contractors and manufactures make no claims or statements, or offer any assurance or assurances, guarantees, promises, either direct or implied, as to the effectiveness or suitability of its products to protect any property or possessions from fire damage or any other calamity whether anticipated or foreseen. Monarch Fire Technology. and its suppliers and vendors disclaim all express or implied representations or warranties regarding the information, services, products, materials, and any other resources available on or accessible through this site or via direct contact with the company, including (without limitation) any implied warranties of merchantability or fitness for a particular purpose. All such information, services, products, information, opinions, materials, and other resources are made available "as is" and "as available" without warranty of any kind. Property damage up to and including total destruction of the structure or property being covered may occur even under the best conditions. Monarch Fire Technology shall not be liable for any loss, injury or death or any direct or indirect damages arising out of the deployment of, or use of, its products.

Monarch Fire Technology believes the information herein is the best currently available. It is subject to revision as additional knowledge and experiences are gained. Monarch Fire Technology makes no guarantees of results and assumes no obligation or liability in connection with this information or the use of its products.

There are uses and environments for which these products are unsuitable. Due to the extreme conditions, high heat, high winds, low humidity, and unpredictability associated with all fires it is impossible to make guarantees. It is the user's sole responsibility to determine that this product is appropriate for the intended use and complies with the health and safety laws and regulations. Before using, the user agrees to assume all risks and liabilities in connection with deployment, application, take-down, use and/or storage of Fire Shields. Sellers and manufacturers only obligation shall be to replace any Fire Shields found to be defective within one year from the date of purchase.

As a condition of any sale the Customer agrees and accepts all conditions, requirements, limitations, and terms as stated in the Monarch Fire Technology Terms and conditions document and the Terms and conditions statement located on the company website and on the company sales invoice, and agrees and understands that acceptance of these conditions are required and mandatory in order to conduct business with Monarch Fire Technology or its suppliers and vendors.


to the maximum extent permitted by applicable law, with respect to products, goods, or services purchased through monarchfire.com.au or from monarch fire technology., or from its suppliers or vendors, in no event shall monarch fire technology., or its suppliers or vendors, be liable for any direct, indirect, special, punitive, incidental, exemplary, or consequential damages, or any damages whatsoever, resulting from any loss of use, loss of data, loss of profits, business interruption, relocation expense, insurance deductible or premiums, litigation, or any other pecuniary loss, whether based on breach of contract, tort (including negligence), product liability, or otherwise arising out of or in any way connected with the use of or performance of its products or information, with the delay or inability to deliver products to the customer, or the dependence on third parties to provide delivery service to the customer or the provision of or failure to make available any such products, goods, or services, even if advised of the possibility of such damages.

you acknowledge and agree that the limitations set forth above are fundamental elements of this agreement and the site and products or services would not be provided to you absent such limitations.

Conditions of Use

Always obey fire, police, and all other emergency personnel when ordered or requested to evacuate an emergency area immediately.

Use extreme caution when walking on shields that are wet or walking on dry shields with wet shoes. SHIELDS ARE EXTREMELY SLIPPERY AND DANGEROUS WHEN WET. Use safety ropes and harnesses if working on roofs.

Monarch Fire Technology does not encourage homeowners to climb on the roof of any structure and provides information on how to deploy without mounting roofs or leaving the ground. Always use caution if walking or standing on a roof, ledge or using a ladder. Monarch Fire Technology recommends testing all roofs for structural integrity before walking on them.

Avoid contact of the fire covers with all power lines and cables attached to structures. Use extreme caution when deploying in high wind situations especially when working near power lines, windows, vehicles, on roofs, or on ladders, or scaffolding. Beware of potential damage due to wind blowing the shields causing them to strike property and cause damage.

Be aware that winds can and will increase during a fire and can reach speeds of 50km/h or more. When covering a roof surface it is imperative that no seams or edges are open that can allow fire material to enter under the cover and cause ignition. Seal ALL seams using shield bands, nails, sandbags, or other weighted material that cannot be dislodged by high winds. It is imperative that the edges of the tarps are secured either to the structure or wrapped around the structure and secured to prevent wind from dislodging the edges. See the product instructions included with the product for proper installation instructions and review our installation tips.

Due to the high reflective characteristics of the Aluminised material avoid looking at the material when possible on sunny days without proper eye protection. Monarch Fire Technology recommends wearing protective dark glasses when installing Fire Shields during daylight hours.


The release form can be accessed here


This release form must be initialed and signed where indicated by the purchaser acknowledging agreement and unconditional acceptance of the terms and conditions as set forth within this release form as a condition of any sale or rental between the purchaser and Monarch Fire Technology. Please return the form to Monarch Fire Technology via email to info@monarchfire.com.au. No sale, purchase, or deposit can be registered or processed until this form has been received and approved by Monarch Fire Technology. Form and signature must be legible.